Avian Brands Friends, damp walls are one of the common problems found in every home. Especially entering the rainy season like now. If damp walls are left unchecked, mold will eventually appear which can affect the health of the occupants. Besides being bad for health, mold will also appear to disturb the beauty of the house.
Actually, there are several factors that cause walls to become damp, namely:
Room adjacent to the bathroom
Rooms adjacent to wet areas like bathrooms are very likely to experience dampness. This is due to the bathroom's constantly wet condition, where the wall sections will certainly become damp/wet.
Read Also: Maintain Wall Quality in the Rainy Season with No Drop
Leaky Roof
A leaky roof condition will make it easier for water to drip and flow down the walls during rain. This causes walls to become damp and moldy. It's best to immediately carry out repairs, then apply waterproofing paint to avoid issues with seeping walls or leaks. Use waterproofing paint or anti-leak coating paint such as No Drop Anti-Leak Coating Paint.
You can apply this paint on materials such as walls, asbestos, zinc, and terracotta. Its waterproof, elastic, and highly weather-resistant capabilities are its main strengths, coupled with its very easy application, decorative appearance, and long-lasting durability. How about its use? Here's how:
1. Stir No Drop Anti-Leak Coating Paint thoroughly before use.
2. For wall, concrete, asbestos, and plaster surfaces:
- apply 1 coat of No Drop diluted with approximately 20% water as a primer.
- Allow to dry before applying the next coat.
- For the second coat and subsequent coats, apply No Drop undiluted until a minimum thickness of 250 microns is achieved.
3. For galvanized/zinc surfaces:
- Apply 1 coat of Active Primer as a base coat to achieve good adhesion.
- After drying, apply No Drop undiluted until a minimum dry film thickness of 250 microns is achieved.
Read Also: Entering the Rainy Season, Know 4 Standards for a Leak-Free Roof
However, before painting, first ensure that the surface to be painted is dry and free from dirt. Once cleaned, make sure the surface is dry and then coat the wall with waterproofing paint or anti-leak coating paint.
Come on, quickly solve wall problems at home using the methods above. Hope it inspires and is useful!
