Exterior wall paint plays an important role in a house. Besides providing an aesthetic aspect to the wall, it also serves to protect the wall from exposure to sunlight and weather.
Exposure to sunlight and weather changes can cause exterior wall paint to quickly experience damage such as peeling, faded colors, and mold. Therefore, it is important for Avian Brands Friends as homeowners to be careful in choosing exterior wall paint products.
The selection of wall paint for exteriors must certainly be more selective than choosing interior wall paint. Exterior wall paint must be resistant to extreme weather and also durable. This is because paint for exterior walls or the outside of the house must be adjusted to environmental conditions.
For Avian Brands Friends who are confused about choosing a high-quality exterior wall paint brand, you should choose Exterior Wall PaintSunguard All-In-One from Avian Brands.
Sunguard All-In-One Wall Paint is made from 100% superior acrylic, specially formulated without mercury and lead, and can withstand heat, making room temperature 5 degrees Celsius cooler, colors do not fade easily, perfectly covers hairline cracks, and dirt does not easily stick due to its self-cleaning technology, keeping walls clean, free from mold, and moss with 15 years of protection.
Let's check out the application stages for Sunguard All-In-One Exterior Wall Paint below:
Surface preparation:
1. Ensure all surfaces are dry and clean, free from dust, dirt, oil, and not contaminated with other materials.
2. Clean areas with mold and moss.
3. On new walls/new concrete:
- The wall surface must be perfectly dry before painting, not just touch dry/surface dry (protimeter measurement must be <17 with pH <9).
- Apply 1 coat of Lenkote Alkali Resisting Primer, let dry for at least 2 hours or overnight.
- The surface is ready to be painted with Sunguard All-In-One for the final coat (2-3 coats).
4. On old or previously painted walls:
- If the adhesion and condition of the old paint are still good, it can be painted directly.
- If the old paint is chalking, apply 1 coat of Lenkote Wall Sealer to increase adhesion and let dry for at least 2 hours or overnight.
- The surface is ready to be painted with Sunguard All-In-One for the final coat (2-3 coats).
How to use:
- Stir first before use.
- For brush/roller application: dilute with 0-5% water.
- For spray application: dilute up to 20% water.
- Apply 2-3 coats of Sunguard All-In-One.
