The beauty of a home's exterior design would not be complete without being protected by a fence. Fences play an important role in adding beauty to the exterior of a home. Therefore, regular maintenance is required, as fences are always exposed to unpredictable weather. One common material used for fences is iron. Iron fences are very prone to rust, making the home's appearance less appealing. If this is the case, you should start paying attention to the beauty of your home's iron fence so it remains pleasant to look at.
You can use iron fence paint products from Avian Brands, namely Avian Wood and Iron Paint.
Alkyd-based paint provides maximum coverage with a very glossy finish. This paint is not only used on iron but can also be used on wood. Avian Wood and Iron Paint formulates paint with maximum coverage, preventing water penetration that causes rust and mildew. Avian Wood and Iron Paint produces the whitest white in its class.
Here are some steps to paint rusty iron fences:
1.Prepare the necessary toolsFirst, prepare the tools and materials, including:
- Gloves
- Goggles
- Mask
- Wire brush
- Rag
- Mineral spirits (a type of thinner)
- Warm water
- Soap
- Water sprayer
2. Cleaning rust on the iron fence surfaceClean the rust with a wire brush and ensure the entire iron fence surface is clean. Then dampen a rag with mineral spirits and wipe the brushed areas. Next, wash the fence with warm soapy water, as some paints cannot tolerate mineral spirits. Then, wipe again with a soapy rag and rinse off any soap residue with water. Finally, let it dry overnight before painting.
Read Also: Understand the Causes of Exterior Paint Fading Quickly
3. Painting process using iron paintAfter the fence cleaning process is complete, apply a primer as the first coat. Then wait until it dries. Next, apply Avian Wood and Iron Paint as the second coat. Use at least 2 coats for iron paint to achieve a more beautiful result. Ensure each coat is completely dry.
