Leaks in the upper concrete slab can be caused by many factors, the most fundamental being errors during the foundation construction process or during the coating process. For example, during the construction process of a concrete slab that is not solid, the concrete slab thickness is too thin, and there is no layer protecting the upper boundary of the concrete slab. These factors cause cracks and leaks/water seepage due to pressure.
To overcome these problems, you can address them in the following ways:
1. Check and inspect the condition of the concrete slabThe first step is to check and inspect the condition of your home's concrete slab. To find out the problems with the concrete slab, you can test it by wetting the concrete slab with water; with that, you can identify the areas of the concrete slab experiencing leaks/seepage.
2. Clean the concrete slab areaAfter identifying the concrete slab area experiencing leaks, clean the area from dust and dirt thoroughly using a brush. Make sure the concrete slab is dry before doing so.
3. Cover the cracked parts of the concrete slabThe third step, if there are hairline cracks, it is advisable to use a waterproof coating paint on the concrete surface with No Drop Waterproof Coating Paint for concrete slabs to prevent leaks, making them stronger and more durable.
No Drop Waterproof Coating Paint has elastic, waterproof, and durable properties. These are several ways that can be used to overcome leaks in the upper concrete slab. Hope this is useful!
